ERS-44HSA/44-12G/44MF - PRODUCTS

The compact 1U half-size routing switcher boosts exceptional cost performance.

4 multi-bit rate inputs and outputs. Supports 12G/6G/3G/HD/SD-SDI and DVB-ASI signals.

3Model Lineup

ERS-44HSA

Supports 3G/HD/SD-SDI and DVB-ASI, 4 inputs/4 outputs.

ERS-44-12G

Supports 4K, 12G/6G/3G/HD/SD-SDI and DVB-ASI. Input/Output can be changed to 2x6, 3x5, 4x4, 5x3 or 6x2.

ERS-44MF

Supports 12G/6G/3G/HD/SD-SDI and DVB-ASI. Input/Output can be changed to 2x6, 3x5, 4x4, 5x3 or 6x2.
Redundant Power supply.^*1
AVDL function^*2and simplified multi viewer function^*2.
Front touch panel is removable and can be used as a remote controller.

*1 Optional. *2 Except DVB-ASI and some formats.

Features

Multi-bit rate inputs and outputs

12G*/6G*/3G/HD/SD-SDI bit rates and DVB-ASI signals are supported by each input and output. Auto input detection eliminates the need to know the supplied signal rates.
*Only ERS-44-12G supports 12G/6G-SDI.

Auto cable equalization and SDI reclocking

Auto determination of source signals

Routing setting

Set up routing on the front panel or remotely via serial commands (RS-232C or LAN) or SNMP (LAN).

Router monitoring

Router monitoring with SNMP or serial commands
GPIO control

SNMP trap output

Monitoring and detection of power, I/O carriers, reference input, and switching of output or blanking formats and reporting to up to four IP addresses

Communication interface

Communication interface can be configured via telnet (RS-232C, LAN, SNMP).

Redundant power supply ^{*ERS-44MF:Optional}

^{Redundant power supply prevents failure of one power supply from affecting operation.}