Meda over IP SoutionsSoutionFOR-A SystemntegrationSystemVdeo Routing SwSwitchersitchersMulti VewersProcessorsVirtual Studo / On-Air GraphcsCharacter Generatorsile Based Products• IP: 2 inputs, 1 output (SMPTE ST 2022-1/-2 compliant signals).• ASI: 2 inputs standard, expandable to 4. 4 outputs standard, expandable to 6. Selected signals and input signals can be changed for each interface.• Seamless switching between TS/TS, IP/IP, or TS/IP.• Simultaneous TS/IP output.• Error monitoring at the TS level.• 2 inputs standard, expandable to 4.• 4 outputs standard, expandable to 6. Selected signals and input signals can be changed for each interface.• Error detection designed especially for TS signals in data broadcasting.• Separate configuration of monitoring and switching conditions.• Supports multi-bit rate 3G-SDI (Level-A/B) and HD/SD-SDI signals.• Auto, semi-auto, and manual switching.• Detects CRC errors, sync loss, image freezing, and other errors.• Corrects delay between inputs.* USF Web GUI can't confirm mounted state and version of USF-80SDICS. Dedicated GUI is required to confirm state and monitor.Measures video delay, audio delay, relative delay between audio channels, or relative delay between video and audio, based on test time code signals.• Supports 2160p/1080p/1080i/720p formats.• Supports 12G*/3G/HD-SDI.• Multiplex original test timecode to video, audio, VANC.• Measurement of video/VANC discrepancies.• Transmission delay from a remote site can be measured using 2 units with GNSS-synchronized clocks*.• Separate configuration of monitoring and switching conditions.• GPIO/SNMP/browser-based remote control and monitoring.• Monitor maximum 8 PMTs and null bit rate.• Logs error details and switching events to internal memory.• SD card slot for import/export settings and log download.• Preset memory for storing up to 4 setting profiles.• Hot-swappable power supply unit.• GPIO/SNMP/browser-based remote control and monitoring.• Logs error details and switching events to internal memory.• SD card slot for import/export settings or log acquisition.• Preset memory for storing up to 4 setting profiles.• Hot-swappable power supply unit.• Frame synchronization.• Signal bypass output.• Configure settings and monitor input signal via the dedicated GUI*.* Optional.4K Time-Lag Checker EDD-5400 IP Changeover SwitcherIPS-6400 TS Changeover SwitcherTSD-6400A 3G/HD/SD Changeover SwitcherUSF-80SDICS TS/TSoIP seamless switcher that provides line redundancy. Monitor a single encoder distribution output. If the selected signal fails, it will automatically switch to the normal signal without affecting the output.Automatic switcher for data broadcasting TS signals. If the selected signal fails, it will automatically switch to the normal signal. This unit also features a hot-swappable PSU.Modular SDI changeover switcher for USF-105AS or USF-212BS frames (p.27). Monitors status of 2 SDI inputs and seamlessly switches to the error-free line if errors are detected. lliI iiiiF25
元のページ ../index.html#25