Tweet

Analog Frame Synchronizer & TBC
UFM-128FS

The UFM-128FS is a module-type frame synchronizer. The world's first 14-bit digital encoder/decoder is used to provide unparalleled image quality.

World’s first 14-bit internal processing frame synchronizer.
Analog composite 1 input and 4 outputs.
NTSC/PAL automatic detection.
4:2:2 component internal signal processing.
Digital 3-line adaptive comb filter processing.
Full frame memory to prevent picture field inversion during processing.
Wide range genlock capability, almost any video signal can be genlocked.
Proc Amp function. (video level, chroma level, setup level and chroma phase)

Specifications

Video Formats	NTSC or PAL (Auto detect)
Video Input	Analog composite: 1.0 Vp-p 75Ω, BNC x 1
Genlock Input	BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p, 75Ω or loop-through (internal selection), BNC x 1
Video Output	Analog composite: 1.0 Vp-p 75Ω, BNC x 4
Signal Processing	4:2:2 component
Correction Range	2 fields (field inversion prevented)
Sampling Frequency	Y: 13.5 MHz, C: 6.75 MHz
Quantization	14-bit
Frequency Response	100 kHz - 4.2 MHz: -0.5 dB - +0.5 dB, 4.2 MHz - 5.0 MHz: -1.0 dB - +1.0 dB, roll off above 5.0 MHz (NTSC)
Frequency Response	100 kHz - 5.0 MHz: -0.5 dB - +0.5 dB, 5.0 MHz - 5.5 MHz: -1.0 dB - +1.0 dB, roll off above 5.5 MHz (PAL)
S/N Ratio	60 dB
DG / DP	1% / 1º (APL: 50%)
K-Factor	Less than 1%
H/V Tilt	Less than 1%
Proc Amp	Video Level: -3 dB to +3 dB / Chroma Level: -3 dB to +3 dB
Proc Amp	Setup Level: -15 IRE to +15 IRE / Chroma Phase: -30º to +30º
Genlock Phase Control	H Phase: -2 µs to +2 µs SC Phase: -180º to +180º H Position: -2 µs to +2 µs V Position: -128 line to +127 line
Temperature / Humidity	10ºC to 40ºC / 30% to 90% (no condensation)
Power / Consumption	Supplied from UFM frame, +12 V DC to +24 V DC / 10 VA (10 W)
Dimensions	106 (W) x 303 (D) mm (Front board) 106 (W) x 66.1 (D) mm (Rear board)
Weight	0.5 kg
Slot Requirement	1 slot
Accessories	Operation manual

Materials

High Resolution Photos

FA-128

The FA-128 is a frame synchronizer. The world's first 14-bit digital encoder/decoder is used to provide unparalleled image quality.

FA-125

The FA-125 is a low cost Time Base Corrector / Frame Synchronizer. It corrects by up to one full frame the time base error/ phase shift problems that can occur during recording/playback of composite signals when using heterodyne process VTRs.

FA-115

FA-115 is a low cost Time Base Corrector / Frame Synchronizer with Noise Reducer and cable compensator, which is specifically designed for CATV, ITV and CCTV applications.

UFM-125TBC

The UFM-125TBC is a Frame Synchronizer/Time Base Corrector. It corrects time axis distortion and synchronization phases through 10-bit processing.

UFM-115TBC

The UFM-115TBC is a Frame Synchronizer/Time Base Corrector for universal frames (UF-106, UF-112). Noise reduction and cable compensation function are available.