UFH Frame (12 Modules)
UFH-112A

UFH frame with outstanding reliability and maintainability, supporting the installation of up to 12 UFH series modules in the compact 3RU frame.

Up to 12-modules in the UFH series can be installed.
Installation of redundantpower supply supported (option).
Hot swapping for power supply and modules supported.
The front boards can be easily replaced from the front of the unit, even without disconnecting the rear board cables.
Alarm detection and status displays are indicated by a front panel LEDs, and the alarms can be output to an external device.
Loopthrough connectors are provided as Genlock inputs, and the input signals can be distributed to all the modules.

Specifications
Installable Modules	The number of maximum installable modules varies depending on the power consumption of installed modules.
Genlock In	BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.), Tri-level sync: 0.6 Vp-p The genlock signal can be distributed to all the modules with in.
Interfaces	Alarm Output: 15-pin D-sub (female) x 1 (power supply error, fan error, temperature error)
Temperature / Humidity	10ºC to 40ºC / 30% to 90% (no condensation)
Power	100 V AC to 240 V AC, ±10%, 50/60 Hz
Power Consumption	440 VA (440 W) at 100 V AC, +24 V DC, 6.3 A
Max. Draw	+24VDC, 6.3A
Dimensions / Weight	430 (W) x 132 (H) x 500 (D) mm, EIA 3 RU / 15.0 kg (including one Power supply unit)
Accessories	Operation manual, AC cord, Rack mount bracket
Options	UFH-112APS: Power supply unit (for Redundant)